Contact Us

Please send inquiry to our email

Weihai Hanvy Plywood Machinery Manufacture Co.,Ltd

Add:   No.8-18 Manxing Rd, Manshan, Weihai City , Shandong Provice, China 264200

Tell:  +86-631-5967877

Phone: +86-18660385796

Fax:   +86-631-5960628




Vietnam dealer--THANH DANH DN CO., LTD

Add:   92/5A, Ha Nigway, Group 5B, Tan Bien Ward Bien Hoa City, Dong Nai Province, Vietnam

Tell:  +84-903690779

Fax:   +84-613 889815



Home > News > Content

Basic Structure Of Veneer Stackers

             BDD1113-1 Single Board automatic stacking machine is the latest supporting equipment of veneer shearing production line (rotary cutting machine) in plywood production. The equipment has been successfully developed and put into production and used, the end of the single Board of the single board manufacturer of veneer shearing after the history of artificial stacking, greatly improving the production line of the single board of China's mechanization, automation level.Veneer Stackers

             Veneer Stackers The basic structure of BDD1113-1 single Board automatic stacker is mainly composed of conveying part, frame part, adsorption part, pneumatic part, connecting plate part and control system. 1) conveying part. The conveying part mainly consists of conveying frame, conveyor belt and driving roller. The conveyer adopts the steel plate welding structure, the overall rigidity is good, the strength is high, mainly is used to support the conveyer belt and the driving roller. The driving roller has an active roller and a driven roller, which is mounted on the two ends of the conveying frame, and the bearing seat of the driving roller is fixed on the conveying frame with bolts. Conveying with the upper and lower floors, there are 2 transport belt, below the transport belt 4, holding a single plate forward transmission. 2) Framework section. The frame part mainly consists of supporting leg, longitudinal beam, crossbeam and connecting plate, which is mainly used to support the adsorption part. 3) adsorption part. Mainly by the fan and adsorption hood, and so on, used to transport to the board above the specification of veneer from the conveyor belt to suck up. 4) Pneumatic part. Mainly consists of the cylinder, the gas source three conjoined and so on, is used for the variable gradient adsorption unloading mechanism and the elevating platform to provide the power for the device to complete the predetermined action. 5) part of the board. Mainly by the shear-type hydraulic lifting table and the device, used to stack the specifications of the veneer. 6) control system. The use of programmable Controller inverter touch screen operation terminal and other components. The humanized design of the control system achieves the design goal of fast processing speed and stable performance.Veneer Stackers